There is my Yokosuka R3Y2 Keiun from FINE MOLDS.
I built it "from the box" and I just added the seatbelts and
rebuilt the small accordion part of the landing gear doors with some metal sheet.
The stabilators and the ailerons were cut and repositioned in a more dynamic
configuration.
Click on
images below to see larger images
Then the model was painted with
Tamiya color as per as the FINE MOLDS instructions ( nobody really don't know if
the underside was orange or gray, so did it orange ! ), and
the 7 decals were added.
As it was a prototype, which flew
only one time, there is not enough weathering and the airframe must rest
relatively clean.
All in all it’s a good kit of
an original plane.
Stéphane
|