Subject: Re: latest roll out
From: "Submissions for ARC" <[email-masked]>
To: <[email-masked]>
Date: Fri, 9 Mar 2007 11:57:09 -0800

Hi,
I just wanted to let you know your article went on ARC today.  Thanks again 
for sending it in.

Steve Bamford
Aircraft Resource Center
http://www.aircraftresourcecenter.com

Live like there is no tomorrow;
Love like you've never been hurt.
Work like you don't need the money.
Dance like nobody's watching.
Sing like nobody's listening.
Live like it's Heaven on Earth.

----- Original Message ----- 
From: <[email-masked]>
To: "AIRFAN" <[email-masked]>; "T-Stoff" <[email-masked]>; "Volker 
Helms" <[email-masked]>; "Steffen Arndt" <[email-masked]>; 
"Andrew White" <[email-masked]>; "Lynn Ritger" <[email-masked]>; 
"Jules Bringuier" <[email-masked]>; "arc arc" 
<[email-masked]>; "Brett Green" <[email-masked]>; 
"Scott van Aken" <[email-masked]>
Sent: Sunday, April 30, 2006 10:40 AM
Subject: FW: latest roll out

>
> -----Original Message-----
> Date: Sun, 30 Apr 2006 20:26:35 +0200
> Subject: latest roll out
> From: "[email-masked]"
> To: "Bill Bosworth" , "Jim Kiker"
>
>
>
> Hello,
>
>
> I just did some nearly
> final bits on the 109, some minor items are still left open (guns,
> exhaust strains e.a.). It´s the Tam kit.. All the ribs on the flying
> surfaces were puttied and sanded and instantly the whole thing looks
> better. The steam engine rivets on the canopy frames were deleted ,
> too. What I don´t like are the undersized code letters and the softened
> wire. It had the correct tension after being fixed.
> The model was primed with automotive primer, then smoothed with
> micromesh. then Schmincke artist airbrush acrylics (self mixed) then
> weathering with Schmincke again. A coat of Future (thinned with 50% of
> destilled water) and micromesh treatment (4000 and 6000). The recessed
> panel lines filled with a wash of white spirit and a dark X-tra color
> mix. Decaling, again the Future mix, micromesh and finally a coat of the
> best and cheapest  variant of semi flat: Marabu aqua flat varnish (for
> silk-painting), touch dry after 30 minutes , 250 ml (!!) for just ? 7.80
> and WEATHER PROOF. If you like it, more pix after full cpmpletion.
> Cheers from Berlin
> Andreas Beck
>
> So far, everything is ok over here, more during the week.
>
> Cheers
>
> Andreas
>
>