Subject: Re: Tamyia 1/48 scale "Swordfish"
From: "Submissions for ARC" <[email-masked]>
To: <[email-masked]>
Date: Mon, 18 Feb 2008 18:17:43 -0800

Hi,
I just wanted to let you know your article went on ARC today.  Thanks again for sending it in.

Steve Bamford
Aircraft Resource Center
http://www.aircraftresourcecenter.com

Live like there is no tomorrow;
Love like you've never been hurt.
Work like you don't need the money.
Dance like nobody's watching.
Sing like nobody's listening.
Live like it's Heaven on Earth.

  ----- Original Message ----- 
  From: [email-masked] 
  To: [email-masked] 
  Sent: Monday, February 18, 2008 7:52 AM
  Subject: Tamyia 1/48 scale "Swordfish"

      The following are additions to the model:

     1. For the engine, I made the mounting ring, braces and oil lines. Made the torpedo
          aiming bars, atop the cowl, steps on the landing gear struts and loops at the 
          wing tips. I also drilled al the holes for the rigging wires. For the rigging wires
         I used the smallest spring wire available. For the rest I used the parts from the 
         kit.

     2. For the paint job, I used "Humbrol" paints, for both interior and exterior.

     3. For the markings, I used the decals that came with the kit.

         Overall, I found the kit of good quality and easy to work with.

       Model depict a Swordfish Mk.1, flown by Lt. A.W.D. Beale. Squadron ???

      Please let me know if you receive this message O.K.

------------------------------------------------------------------------------
  Delicious ideas to please the pickiest eaters. Watch the video on AOL Living.