|
|
J-Bot Decals
NATO 50th Anniversary
CT-114 Tutor
1/72 and 1/48 scale
Review by Steve Bamford (ARC Staff)
This is the very colourful CAF Tutor jet that was painted up to mark the 50th Anniversary of NATO. These decals are printed on an ALPS printer, so they do need to be individually cut from the decal carrier film but this is a tiny inconvenience when compared to the pleasure of finding decals for this colourful little training jet. I found the quality of these decals to be very nice and typical of the amazingly high standard of quality of printing that is possible from an Alps printer. The Artwork was well done on this sheet and it's obvious the person doing these decals knows what he is doing.
(resolution of decal sheet has been reduced to protect the art work)
|
|
|
|
This following information is from their instruction sheet.....
These
decals are printed on very thin and fragile paper.
Soak
them in warm water for 10 to 15 seconds. Remove. Wait 10 to 15 seconds. Pre-wet
the surface (with a setting solution, if you so desire). Peel (or lift) the
decal from its backing paper. Do not slide or pull.
Place the decal. Position carefully. Blot dry.
If
you have any questions regarding these decals, or if you need more reference
photos, or if you want a custom sheet made, check out my site at:
