The RQ-1 Predator is a medium-altitude, long endurance unmanned aerial vehicle system. The RQ-1A designation is for the pre-production version while the RQ-1B designates the baseline production vehicle. RQ-1B Predators, operated by both the CIA and USAF, were widely used for surveillance and, for the first time, in direct action against key targets in Afghanistan. In general, the Predators were used to provide detailed targeting information, often expanding on electronic intelligence from the Nimrod R.Mk 1, RC-135 Rivet Joint and the EP-3E Aries II. In this role, they worked alongside U2s and, later, RQ-4 Global Hawks and E-8 J-STARS. Predators fed live imagery back to their ground stations, revealing details of the targets, whose precise location was then uplinked to loitering strike aircraft. Predators worked closely with, among others, AC-130 gunships and F-15Es. In the direct attack role the Predator carried two AGM-114 Hellfire missiles which could be guided by operators at ground stations in real time. In one instance, they were used against a specific al-Qaeda target in a residential area, where the use of precise aiming and a small warhead were imperative.

Click on images below to see larger images

This model depicts a Predator in the attack role. The Unicraft kit (1/72) is made up of 17 pieces cast in a light tan resin. The landing gear has been cast with a metal wire trapped inside each leg which will definitely help support the resin body. I started off by filling in the small pinholes which seem to inhabit most resin kits. I also filled in the panel lines which is my preference in this scale. As all of the parts were made to mount flush, brass pins were used to connect the wings, stabilizers and weapon pylons to the main body for increased support. Be very careful as to how you treat the model as it is being assembled! After I joined the wings to the main body, both wings looked straight and level. However, the left wing started to warp on me when I tried to speed up the drying of the paint by placing the Predator in a warm (110 degree) food dehumidifier. This warpage can be seen in several of the photos.  There is definitely a moral in this story somewhere!

Click on images below to see larger images

 For ease in handling the model while building it, I drilled a deep hole through the tail into the body and inserted a brass rod for use of a handle. When the model is complete, the prop spinner will cover the hole.

The main landing gear are joined together with a plug that slips into the fuselage. I found  it easy to add the main gear before painting which allowed me to fill in the resulting seam. The main gear was easy to mask off while painting.  I painted the gear legs Testors Interior black, added detail from a silver artist pencil and painted the wheels Testors Euro 1 Gray. This is my favorite color for scale aircraft tires.

All photos that I found of the Predator with Hellfires showed them without the top avionics hump and with a blade antenna in the same position. A blade antenna was made from brass PE from the spare parts box. Engine inlets were drilled out. The weapons pylons were modified with styrene strip. The Hellfire missiles are from the spare parts box (compliments of Andre van der Hoek, a regular ARC visitor) and were detailed by drilling out the exhaust and nose area. A clear optical seeker head was added to each missile by using epoxy.

Click on image below to see larger image

A nose probe was added from a segment of a straight pin. Colored wing lights were added from a CMK light detail set.  Remove Before Flight tags were added based on photos.
I painted the Predator overall white (Testors Model Master Enamel containing a drop of light blue to prevent yellowing) with yellow markings on the prop. The model was finished with a combination of kit decals and decals from the spare parts box. The kit was then sprayed with PollyScale Satin finish followed by gluing on the final details such as the Hellfire missiles, front landing gear and antennas.  The front sensor was also painted white, detailed with different metallic gray paints and attached without being oversprayed by the Satin finish.  After I finished my model, the presence of a light gray on the underside of the UAV has been confirmed, at least for the Hellfire equipped versions.	Click on image below to see larger image
All in all, I highly recommend this kit if you would like to have something different sitting on your model shelf!

Mike