Mike's Custom Plastic - Very Cheap! Great Quality! Free Custom Sizing On All Orders!

I am a hobbyist who enjoys vacuforming polystyrene and being creative. When I decided to start this pastime, I collected a lot of information on it and found that one of the spoilers of this hobby is that there is a lack of places on the web to buy plastic cheaply and in large quantities. Also, the sizes offered on hobby sites or in hobby stores were never quite the right sizes that I needed. They were always too short, too long, etc. My goal is to provide the plastic that you want and need at a fraction of the cost of the big hobby retailers.

I sell plastic for any vacuforming or scratch building project and can customize any size or shape up to 4'x8' dimensions. Custom sizing is totally free on all orders! The plastic comes in any thickness available and is of excellent quality.

See the "Products and Pricing" below to see a complete list of the plastic products I sell.

Mike

Products and Pricing as of Sept 27 2003

The plastic that you order can be of any size and thickness that you want. There is no such thing as a standard size. Get any size you want!

Pricing depends on the size and thickness of the particular plastic. Rates are calculated by the square inch. Below are some example sizes for polystyrene:

- .080" 1 square inch = $0.012

For example, a 12"x12"(144 square inches) piece of polystyrene, .080" thick, will cost $1.73.

- .060" 1 square inch = $0.0084

For example, a 12"x12"(144 square inches) piece of polystyrene, .060" thick, will cost $1.21.

- .040" 1 square inch = $0.0056

For example, a 12"x12"(144 square inches) piece of polystyrene, .040" thick, will cost $0.81.

- .030" 1 square inch = $0.0042.

For example, a 12"x12"(144 square inches) peice of polystyrene, .030" thick, will cost $0.61.

- .030" 1 square inch = $0.0030.

For example, a 12"x12"(144 square inches) piece of polystyrene, .020" thick, will cost $0.43.

- .030" 1 square inch = $0.0021.

For example, a 12"x12"(144 square inches) piece of polystyrene, .010" thick, will cost $0.30.

-----------------------------
Virginia residents please add 4.5% sales tax.
-----------------------------

Click here to go to Mike's Custom Plastic website