1/48 Hasegawa F/A-18E Super Hornet

Gallery Article by Burt Gustafson on May 7 2013

 

 

For your viewing pleasure, here are some photos of my 1/72 scale F/A-18E Super Hornet. The F/A-18E Super Hornet is a single seat, twin-engine carrier-based multirole fighter aircraft based on the McDonnell Douglas F/A-18 Hornet. The Super Hornet looks a lot like an F/A-18C, but it is largely a new aircraft. It is about 20 percent larger, has more powerful engines, and can carry more ordnance than the original Hornet. 

The Super Hornet carries more internal fuel, increasing mission range and endurance over the "Legacy" Hornet. Unlike the "Legacy" Hornet, the Super Hornet is designed so it can be equipped with an aerial refueling system (ARS) or "buddy store" for the refueling of other aircraft, filling the tactical airborne tanker role the Navy lost with the retirement of the KA-6D and S-3B Viking tankers. 

The Super Hornet entered service with the United States Navy in 1999, replacing the Grumman F-14 Tomcat, which was retired in 2006, and serves alongside the original Hornet.

 

Click on images below to see larger images

Construction
This was an out of the box build—no after market accessories. Construction began with the cockpit that went together nicely. However the finished cockpit lacks detail. Instrument panel and console detail is provided with decals—there are no seat belts for the ejection seat. The two part canopy is crystal clear with just a faint mold line down the middle, and it fits nicely.

Overall, construction is straight forward just following the instructions. Some gap filling and sanding was required when joining the top section of the fuselage with the bottom section. Also, some seam filling was required when joining the wings to the fuselage. The rest of the kit went together nicely—very little filler was used.

Painting
All paints used for this model were airbrushed with Model Masters and Floquil enamel paints. In painting my F/A-1E Super Hornet, I deviated a bit from the standard F/A-18E paint scheme; Light Ghost Gray with a Dark Ghost Gray camouflage pattern. Because the Light and Dark Ghost Gray paints are almost the same color, I airbrushed the wings and body of the model with Light Ghost Gray. Wheel wells and landing gears were painted with Floquil Reefer White. The exhaust cans were painted with Model Masters Burnt Metal. The AIM-120 and AIM-9X missiles were painted with a combination of Light Ghost Gray, Gunship Gray, and Reefer White. The trailing edges of the wings and vertical stabilizers were painted with MM Intermediate Blue. Note the black areas down the middle of the model and the black and red vertical stabilizers were not painted, those are decals.

Decals
Decaling my Super Hornet was challenging for several reasons. First, there are a huge number of decals that go on the Super Hornet—over 100. If you build this kit, be prepared for long sessions of decaling. The second and most challenging was applying the decals to the vertical stabilizers and areas around the cockpit. The decals for these areas are large and tore because of the irregular surfaces of these areas. I patched the tears with paint—Signal Red and Gloss Black. The rest of the decals were fine. They performed reasonably well settling down in the panel lines. I used a bit of Solvaset on each decal to ensure it snuggled down to the model surface.

Comments
This was a nice kit to build. Overall construction is a fairly painless with well-fitting parts. The external detail is excellent and the instructions are clear and well drawn. Despite my troubles with the decals, the decals were of excellent quality. The overall quality of this kit is excellent, typical for a Hasegawa kit. I was pleased with the finished model—a colorful and attractive model.

Burt Gustafson

Click on images below to see larger images

      

Photos and text © by Burt Gustafson