These new resin set from
Cutting
Edge Modelworks will permit you to change to the late style seamless
intakes and update yhe rear fuselage on your 1/48 Trumpeter RA-5C Vigilante kit.
The conversion is
very straight forward and includes the 4 parts you'll need for the RA-5C
late style Seamless Intakes & Full Throats on
both sides. This
set provides properly configured (Dash 10 engine) intakes and seamless full
intake throats for the late Viggie. Also included is the "thumb"
shaped part at the aft end of the fuselage is more-or-less correct for the EARLY
RA-5Cs, it is not useful for the later models. Therefore, our set includes a
properly shaped and configured rear fuselage part for the later (Dash 10)
Viggies.
Resin casting
is of a very high quality and all the detail is very well done with no air
bubbles. This
new resin set from Cutting
Edge Modelworks will permit modelers to build the later style of the RA-5C
Vigilante.
I would like to
thank Cutting Edge
Modelworks for providing me with this review sample.
Steve
|